![]() ![]() ![]() Turn the GAIN knob on the front panel clockwise to increase the level until you can hear yourself comfortably. ![]() Set to "LINE" if you are using an external pre-amp or mixer to prepare the signal for the A/D Input. *If you are plugging a dynamic microphone directly to the jack, MIC is the appropriate setting. Set MONO/STEREO = LMono (to match the input jack) Plug in a dynamic microphone to the Left A/D INPUT jack and Set the MIC/LINE parameter to MIC: Turn the front panel GAIN knob to minimum to start. It is better to start soft and turn up, then to turn up first, blow your ears out and then try can get your hearing back. Serious WARNING: In general keep the output of your MOXF slightly lower than normal so that when the Vocoder comes on you do not split your head open with LOUD output. Pitch is determined by the key or keys you play. The Vocoder will apply your voice as a "modulator" for the synth sound. The Vocoder requires you connect a dynamic microphone to the mono AD Input on the back panel, and setup for mic level signal. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |